PBx-10 Power Block

Model: PBx-10

PBx-10 Power Block

Model: PBx-10
Designed to meet the needs of your ventilation and control strategy

The PBx-10 Power Block is a 10-stage control designed to control ventilation equipment for a single room. Power Blocks work with the Select Ventilation module of OMNI Select to control equipment according to your programmed settings.

Control virtually anything

The PBx-10 has 2 variable AC stages, 2 variable 0 to 10 VDC stages, and 6 relays. Durable and rugged, Power Blocks can control virtually any type of load, from ventilation fans to variable frequency drives to augers to lights.

  • AC variable stages for controlling variable speed fans.
  • DC variable stages for controlling variable frequency drives.
  • Relay stages for single-stage heating or cooling, timed events for lighting, or duty cycles for misting.

$123.00

In Stock

SKU: PBx-10 Category: Tag:

PBx-10 | PBx-10 Power Block

  • Central monitoring and control using Select Ventilation software
  • Programmable temperature set point, range: 14 to 122°F (-10 to 50°C)
  • Two variable AC stages
  • Two variable 0 to 10 VDC signal outputs
  • Six general-purpose relays, socketed for easy replacement
  • One alarm relay (for external alarm system or siren)
  • Load Management – coordinates the startup sequence of PBx Power Blocks and relays
  • Optional four-probe temperature averaging
  • Four-digit LED display and status LEDs
  • Temperature sensor; 30 feet, extendable to 500 feet
  • NEMA 4X enclosure (Corrosion-resistant, water-resistant, and fire-retardant)
  • CSA approval
  • Limited warranty
  • Incoming power
    120/230 VAC, 50/60 Hz
  • Variable stages
    10 A at 120/230 VAC, general-purpose (resistive)
    7 FLA at 120/230 VAC, PSC motor
    1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor
  • Variable stage fuse
    15 A, 250 VAC ABC-type ceramic
  • Variable DC stages
    0 to 10 VDC, 2K Ω load
  • Relay stages
    10 A at 120/230 VAC, general-purpose (resistive)
    1/3 HP at 120 VAC, 1/2 HP 230 VAC
    360 W tungsten at 120 VAC
  • Alarm relay
    0.4 A at 125 VAC, 2.0 A at 30 VDC, resistive load
    0.2 A at 125 VAC, 1.0 A at 30 VDC, inductive load

FanDRIVE (1x14 FLA)

FanDRIVEs expand the capacity of your control system by taking the 0 to 10 VDC signal from the control and adjusting fan speed.

View Product

FanDRIVE (2x7 FLA)

FanDRIVEs expand the capacity of your control system by taking the 0 to 10 VDC signal from the control and adjusting fan speed.

View Product

Manual Override Box

The Manual Override Box increases the load handling capability of your control's relays and provides an external disconnect.

View Product

Temperature Sensors

Additional temperature sensors allow you to use 4-zone temperature averaging. Probes are available several lengths and can be extended up to 500 feet using extension cable.

View Product

Phason Rain Sensor

The Phason Rain Sensor detects rainfall and allows you to automatically close the curtain when it is raining.

View Product

PBx-10 Firmware updater

The PBx-10 Updater allows you to upgrade the firmware of PBx-10 Power Blocks. The PBx-10 Updater takes only seconds to use and can upgrade all PBx-10 Power Blocks at your site.

View Product