Web Services Login
- Two variable AC stages
- Two DC signal inputs (0 to 10 V)
- Manual override
- Four motor curve options
- Expandable capacity using additional units
- NEMA 4X enclosure (Corrosion-resistant, water-resistant, and fire-retardant)
- CSA approval
- Limited warranty
FanDRIVE (2×7 FLA)
Model: FD-2-7
FanDRIVE (2×7 FLA)
Model: FD-2-7
A cost-effective way to increase the capacity of your fan control system
FanDRIVE model FD-2-7 is an expansion control that has two 7 FLA variable AC stages for adjusting fan speed.
Installs easily; requires no additional programming
The FanDRIVE connects to a master control and accepts 0 to 10 VDC signals that set the variable AC outputs. Installation is simple and there is no additional configuration required; FanDRIVEs follow the programming of the master control.
The FanDRIVE can control fans connected to any phase. This gives you the ability to distribute loads between all phases on a three-phase system.
Related Products
-
FanDRIVE (1×14 FLA)
Model: FD-1-14
FanDRIVEs expand the capacity of your control system by taking the 0 to 10 VDC signal from the control and adjusting fan speed.
-
Single Stage Variable DC Controller
Model: FC-1T-1VDC
The FC-1T-1VDC has a 0 to 10 VDC signal output and a disconnect relay that allows you to easily and effectively control variable frequency drives.
-
Plus Touch
Model: PLUS-TOUCH
Plus Touch can monitor humidity, ammonia, carbon dioxide, and more. It can then use those conditions to influence how it controls equipment. For example, if the humidity is too high, it can switch heaters on or increase ventilation to reduce it.
