Variable Fan and Fixed-Stage Heater Controller

Model: FC-1T-1VAC-1F

Variable Fan and Fixed-Stage Heater Controller

Model: FC-1T-1VAC-1F
Control ventilation and heating with one easy-to-use controller

The FC-1T-1VAC-1F automatically controls the temperature in a room by adjusting variable speed fans and controlling a heater interlock.

How it works
  • When the temperature is at the temperature set point, the FC-1T-1VAC-1F operates the fans at the idle speed setting and the heater is off.
  • When the temperature exceeds the set point, it increases the speed of the fans.
  • When the temperature drops below the set point, it shuts off the fans (in shut-off mode) or operates the fans at idle speed (idle mode) and switches on the heater or heat lamps.

The FC-1T-1VAC-1F is ideal for poultry, livestock, greenhouse, or light industrial buildings.

$123.00

In Stock

SKU: FC-1T-1VAC-1F Category:

FC-1T-1VAC-1F | Variable Fan and Fixed-Stage Heater Controller

  • One variable speed output
  • One heater interlock output
  • Automatic shut-off and idle modes
  • Adjustable off set-back for shut-off mode (0 to 16°F)
  • Adjustable idle speed for idle mode (0 to 99%)
  • Adjustable temperature set point, range: 32 to 99°F (0 to 37°C)
  • Adjustable temperature differential (1 to 20°F)
  • Three-second full-power-turn-on to minimize fan ice-up
  • LED display
  • Fahrenheit and Celsius display
  • Error code display for troubleshooting
  • Overload protection fuse
  • Six-foot temperature sensor, extendable to 500 feet
  • NEMA 4X enclosure (Corrosion-resistant, water-resistant, and fire-retardant)
  • CSA approval
  • CE certification
  • Limited warranty
  • Incoming power
    120/230 VAC, 50/60 Hz
  • Variable stage
    10 A at 120/230 VAC, general-purpose (resistive)
    7 FLA at 120/230 VAC, PSC motor
    1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor
  • Variable stage fuse
    15 A, 250 VAC ABC-type ceramic
  • Relay
    10 A at 120/230 VAC, general-purpose (resistive)
    1/3 HP at 120 VAC, 1/2 HP 230 VAC
    360 W tungsten at 120 VAC

Manual Override Box

The Manual Override Box increases the load handling capability of your control's relays and provides an external disconnect.

View Product

Temperature Sensors

Additional temperature sensors allow you to use 4-zone temperature averaging. Probes are available several lengths and can be extended up to 500 feet using extension cable.

View Product

Ten pack of 15 A fuses

View Product

General

Is this a replacement for the FHC-1D or VTC-1D?

Yes, it is a direct replacement for the FHC-1D. It also replaces the VTC-1D, the difference being the addition of the heater interlock feature.

Can it be set up to have the fan continually running?

Yes, by using Idle mode. See the user manual for more information.

What is the variable stage rating?

10 A at 120/230 VAC, general-purpose (resistive)
7 FLA at 120/230 VAC, PSC motor
1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor

Can it control fixed-speed fans?

No, the fixed stage is for a heater only. The FC-1T-1F controls fixed-speed fans.

Does this control have a manual override?

No.

How big is the control?

The enclosure is 4.75 x 7.80 x 3.75 in. (12 x 15.6 x 9.5 cm) The switch and knob add an additional 0.75 in. (1.9 cm) to the depth.

Installation

What is the difference between Off Setback (OSB) and Idle modes?

In OSB mode, the fan will idle for a set number of degrees below the set point; it will be off below that. In Idle mode, the fan will always idle below the set point, no matter how low the temperature goes.

Troubleshooting

Why does my fan stay on when my heater is running?

In Off Setback (OSB) mode, the fan will idle when the temperature is below the set point, up to the number of degrees that the OSB is set to. In Idle mode, the fan will always idle when the temperature is below the set point.

Why is my fan off when I am in Idle mode?

You may need to increase the idle speed for your fan. Adjust the idle speed as per the instructions in the user manual.